PLUNGE CUT TRACK SAW 8-1/4" - 576118

Brand:
FESTOOL

Features:
Experience the incredible power of the TS 75 plunge cut saw. No other saw comes close to its power and pinpoint accuracy. Capable of cutting material that is 2-3/4" thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other applications. Save time and create matched panels by cutting stacked sheet goods with one cut. Try the TS 75 once, and you will never look back.

• When used with Festool guide rails, you can achieve perfectly straight and splinter-free cuts.
• Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
• The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
• Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.

Specifications:
• Idle engine speed: 1 350 - 4 400 RPM
• Cable length: 4.00 m / 13.12 ft
• Saw blade diameter: 8-1/4” (210 mm)
• Drive type: 120 VAC
• Cutting depth at 45°: 2-1/8” (55 mm)
• Dust extraction connection dia.: 1-1/16"/1-7/16" (27/36 mm)
• Power consumption: 1 600 watt
• Cutting depth: 0" - 3” (0 - 75 mm)
• Angular range: 0 - 47 °

Includes:
(1) Plunge Cut Track saw
(1) Saw Blade HW 210X2,4X30 W36
(1) splinterguard
(1) hex key 5 mm
(1) plug it-Power Cord
(1) Systainer