CLEAR-CUT STOCK GUIDES - 04215

Brand:
JESSEM
Features:
Your Clear-Cut Stock Guides come fully assembled. To install them on your fence, loosen both the clamping knob and the pivot knob to allow the hex head screw, on each guide, to slide into the T-slot on your fence. Each guide is labeled for infeed side and outfeed side.
Slide them toward your fence guard ensuring they can pivot up and down without hitting the guard.
Tighten the pivot knob on each stock guide in this position. To set each stock guide, slide your wood under the roller of the guide and push down on the guide to reach the desired pressure, then tighten the clamping knob. Repeat for the other stock guide. To ensure your setting will not change during routing the clamping knob on each guide can be tightened with the included 1/4" hex key.
Included:
(1) Infeed Stock Guide
(1) Outfeed Stock Guide
(1) 1/4 in. Hex Key