40V MAX 1" IMPACT WRENCH - TW010GZ

Brand:
MAKITA

Features:
The model perfectly combines high torque and maneuverability, and can replace pneumatic impact wrenches for tightening large-diameter bolts.
3 auto-stop response modes available in forward and reverse rotation.
The trigger switch with full-speed mode (variable speed/full speed) reduces fatigue during continuous operation.

• 40Vmax XGT 1-inch brushless impact wrench (25.4 mm), 3150 Nm (2320 ft-lbs) with auto-stop mode for forward/reverse rotation
• The 1-inch (25.4 mm) D-handle, square-drive impact wrench combines high torque and maneuverability, and can replace pneumatic impact wrenches for tightening large-diameter bolts
• This model is equipped with a long anvil
• Designed with a larger hammer in the radial direction to effectively increase the hammer’s moment of inertia, providing high torque and maneuverability while keeping the hammer size compact
• By designing a vertically positioned motor, Makita reduced the overall tool length and eliminated startup kickback to the hand
• Trigger switch with full-speed mode (variable speed/full speed), meaning full speed is reached with less trigger pressure, reducing fatigue during continuous use
• Variable speed mode or full-speed mode can be selected depending on the application
• Ring LED light – the ring-shaped LED reduces socket shadows on the workpiece for better visibility
• The ring LED also offers pre-glow and after-glow functions, as well as a lighting mode
• Tool-less side handle installation
• The side handle can be installed 360° without tools, and the grip angle can be adjusted forward or backward to suit different operations
• Auto-stop system available in both forward and reverse rotation modes
• Rubber joint design – the battery housing section, separated from the main tool body, features a rubber anti-vibration structure that eliminates terminal vibrations and prevents wear on the battery rails
• Tool hook (ring) for hanging the tool on pipes, hooks, etc.
• Two-finger trigger for easier grip, even with gloves
• Equipped with a genuine Makita brushless motor, specially engineered
• Variable speed trigger control
• Extreme Protection Technology (XPT) provides maximum protection against dust, dirt, and debris for optimal performance in tough conditions
• 4-level electronic impact power selection for added versatility

Specifications:
• Square drive: 1 in (25.4 mm)
• No-load speed: 0 – 950 / 0 – 1150 / 0 – 1400 / 0 – 1800 rpm
• Impacts per minute: 0 – 1750 / 0 – 1500 / 0 – 1300 / 0 – 1200 ipm
• Maximum fastening torque: 2320 ft-lbs (3150 Nm)
• Nut-busting torque: 2950 ft-lbs (4000 Nm)
• Vibration level: 33.4 m/s²
• Sound level: 103 dB(A)

Includes:
• (1) TW010GZ
• (1) 122G63-9 D-handle side grip

Not included:
Batteries and charger sold separately