GRABO BATTERY (4xAA & USB) SUCTION CUP - OTTOVAC

In stock
SKU
OTTOVAC
CA$189.00

GRABO BATTERY (4xAA & USB) SUCTION CUP - OTTOVAC

Quantity available : 10

Warehouse La Prairie (3)
Warehouse Sherbrooke (0)
Warehouse St-Hubert (7)

Availability to come : 4

Brand:
GRABO

Features:
Introducing the OTTOVAC by GRABO. Glaziers, rejoice. The OTTOVAC is a brand new power tool that is going to change the way glaziers move and install glass or any smooth flat surface. It is a portable electric vacuum cup. It presents itself in a traditional pump action style cup, however this sucks onto your material with simply the push of a button, as well as releases pressure with that same button.

This new tool completely removes the pump action that is traditionally needed to gain suction to the cup in addition, it also removes any mistrust on the actual vacuum suction the tool has on your glass because this new tool comes with the revolutionary automatic on / off sensor.

The automatic on / off sensor is built in the tool that tells the vacuum pump to engage to build suction, and to stop when it reaches sufficient vacuum, careful not to build too much suction and break or “pop" your glass. On the other side of the issue, in the event the tool begins to lose suction or "bleed" the tool will kick back in and regain suction, so you’ll always be in the safe zone for as long as you need it. When the vacuum in the base of the suction cup reaches -55 kPa, the pump will automatically stop after a three-second
delay.

When the vacuum level drops below -55 kPa, the pump will automatically restart, reaching the required pressure during operation. The tool is rated to safely hold up to 200kg/440lbs! and is powered by 4 AA batteries.

Specifications:
Battery Alkaline: AA 1.5 V (x4) + RECHARGEABLE LI-ION BATTERY *NEW*
Working voltage: 6 V
Rated power: 6 W
Working cycle: 1500 ON-OFF cycles of 10 seconds
Service life: > 10000 times, > 800h
Rated air flow: 4 l/min
- Maximum vacuum rate: -0.7 bar (-70 kPa)
- Maximum lifting capacity: 200 kg (440lbs)
Dimensions: 200x200x90 mm
Net weight (with battery): 1.2 kg (2.6 lbs)
Working temperature: 0-60°C (32-140°F)
How Much Can the OTTOVAC lift
Glass:
- Perpendicular Hold: 330Lbs (150 kg)
- Parallel Hold: 330Lbs (150 kg)
Ceramic tiles:
- Perpendicular Hold: 330Lbs (150 kg)
- Parallel Hold: 150Lbs (150 kg)

More Information
Manufacturer GRABO BY NEMO POWER TOOLS
incomming qty 4.00
Write Your Own Review
You're reviewing:GRABO BATTERY (4xAA & USB) SUCTION CUP - OTTOVAC
Your Rating