Attention

Schedule
Closed for National Patriots' Day, Monday, May 20.

18V AMPSHARE NIBBLER 1.6MM, BARE - ABLK18-1.6E

In stock
SKU
ABLK18-1.6E
CA$739.00

18V AMPSHARE NIBBLER 1.6MM, BARE - ABLK18-1.6E

Quantity available : 2

Warehouse La Prairie (0)
Warehouse Sherbrooke (0)
Warehouse St-Hubert (2)

Availability to come : 0

Brand:
FEIN

Features:
Compact nibbler with good behavior in curves for the construction of roofs and facades. Precise cuts in corrugated sheet up to 1.3 mm thick. Includes a charger GAL 1880 CV AS, 1x batteries Li-Ion GBA 18 V 4.0 Ah AS, an additional set of punches and dies, a permanent marker, paint tape and a meter.

• 216 [66] ft[m] cutting capacity (in 22 [0.8] gauge[mm] thick sheet) with battery charge (4 Ah).
• Adjustable cutting direction in 45° steps thanks to the matrix that can be adjusted without tools.
• Optimum handling thanks to the ultra-compact gear case.
• Cutting speed of 1.5 m/min for extremely fast work.
• Variable cutting speed thanks to electronic stroke control.
• Cut on a short overlap area up to 2.6 mm thick.
• Circular punch increases service life by 30%.
• Proven MultiMaster motor with exceptional power and strength.
• Compatible with 18V AMPShare/Bosch Professional batteries.
• Maximum working speed with 18 V AMPShare batteries: COOLPACK 2.0 technology ensures a longer life compared to batteries without COOLPACK technology and thus allows longer use times. ECP protects the battery from overcharging, overheating and deep discharge.
• Low operating costs. Punch and die are replaced separately.
• QuickIN die and punch quick change system.
• Perfectly equipped for every use. Mobile working with L-BOXX.
• Advanced cellular technology and intelligent battery management deliver 87% more power than conventional batteries.

Specifications:
Battery voltage: 18 V
Battery compatibility: Lithium-ion/lithium-ion CORE
Battery interface: 18 V AMPShare
Number of races: 850 - 1 350 1/min
Cutting speed: 5 [1.5] ft/min[m/min]
Steel up to 400 N/mm²: 1/16 [1.6] in[mm]
Steel up to 600 N/mm²: 3/64 [1] in[mm]
Steel up to 800 N/mm²: 1/32 [0.7] in[mm]
Non-ferrous metals up to 250 N/mm²: 3/32 [2.5] in[mm]
Cutting width:3/16 [5] in[mm]
ø insert with matrix:7/8 [22] in[mm]
Minimum radius (int./ext.): 1-1/4 [30] / 1-1/2 [35] in[mm]
Weight without battery: 3.77 [1.71] lbs[kg]

More Information
Manufacturer FEIN
incomming qty 0.00
TOOL TYPE Grignoteuse
BATTERY TYPE 18 V
KIT TYPE Outil seul
Write Your Own Review
You're reviewing:18V AMPSHARE NIBBLER 1.6MM, BARE - ABLK18-1.6E
Your Rating