3-1/2" FRAMING NAILER, 30°

Brand:
METABO HPT

Features:
The METABO HPT NR90ADS1M pneumatic framing nailer, tool model NR90AD(S1), drives 30° paper-collated nails from 2 to 3-1/2 in. long. Applications include wall and floor framing, truss assembly, subfloor installation and sheathing. Its 7 lb weight and balanced design make handling easier, while tool-free depth adjustment allows nail penetration to be adapted to the material.

• Selector allows switching between sequential and contact actuation.
• Tool-free depth adjustment dial allows flush driving or countersinking.
• Accepts clipped-head nails assembled in 30° paper-collated strips.
• Two-step rear loading makes nail replenishment easier.
• Two-piece anodized aluminum magazine simplifies repairs and component replacement.
• Open nose provides access to jammed nails.
• Rubber-covered handle and trigger improve grip.
• Additional rubber grip on the back of the tool improves comfort during overhead nailing.
• Head guard designed to simplify disassembly during maintenance.

Specifications:
Product code: NR90ADS1M
Tool model: NR90AD(S1)
Product type: Pneumatic framing nailer
Power source: Compressed air
Nail collation: Paper strip
Magazine angle: 30°
Nail head type: Clipped
Nail length: 2 to 3-1/2 in.
Nail shank diameter: 0.113 to 0.148 in.
Magazine capacity: 50 to 74 nails, or 2 strips
Magazine loading: Rear
Operating pressure: 70 to 120 PSI
Air consumption at 100 PSI: 0.088 ft³ per cycle
Air inlet thread: 3/8 in. NPT
Depth adjustment: Tool-free
Actuation modes: Sequential or contact
Length: 18-3/16 in.
Width: 4-15/16 in.
Height: 12-11/16 in.
Weight: 7 lb

Includes:
(1) METABO HPT NR90AD(S1) pneumatic framing nailer
(1) Pair of 875769 safety glasses