8-1/4" CIRCULAR SAW TS75EQ W/RAIL 75" - 576119

Brand:
FESTOOL

Features:
Experience the incredible power of the TS 75 Plunge Cut Saw, capable of slicing through material up to 2 3/4" thick.
This saw will leave an edge that is both burn and splinter-free; to the extent that your edges will be clean enough to glue without any further prep work.
Save time and create matched panels by cutting stacked sheet goods with one cut.
Try the TS just once and you will discover a means of work so simple and efficient that you will wonder why you struggled for so long with other tools or methods.
The TS 75 is Festool's most powerful plungecut saw, providing enough power to slice through the toughest of materials with little concern for swirl or burn marks.
At 2-3/4" depth of cut, the TS 75 can power through thick stock with ease.
The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
Combined with Festool FS Guide Rails, you have ultimate control over the TS saw for perfectly straight cuts. Add the replaceable splinterguard, and a splinter-free cut is achievable on both sides of the blade.
Simple depth adjustment allows only the part of the blade necessary for the cut to be exposed. The plunge-action allows cut placement anywhere on the cut line for straight cuts or cut-outs into material.
The integrated riving knife keeps the cut kerf open and the material away from the rear of the blade, reducing the chance of kickback and leaving the user in control. Spring-loaded riving knife (splitter) retracts into housing during plunge cuts.
Set the guide rail to the scribe marks and know that it will cut right on the line, regardless of the angle.
Variable speed allows the speed of the saw to be matched to the material. MMC electronics ensure a consistent speed under load, improving cut performance and protecting the saw's motor from thermal and current overload.
Blade changes are easier and safer using the FastFix system. When engaged, the power switch and arbor are locked simultaneously. The saw is also locked into a position to facilitate easy arbor bolt removal.
Specifications:
High-quality carbide blade: 36-tooth (495380)
Guide rail included: 75" (1900 mm)
Slipclutch : included
Splinterguard : included
Limit stop : included
Plug-it Power Cord : included
Power consumption: 1600 watts / 13 amps 120 v AC
Saw blade speed: 1,350 - 3,550 rpm
Saw blade diameter: 8-1/4" (210 mm)
Bevel cuts: 0° - 45°
Cutting depth on guide rail: 2-3/4 po (70 mm) straight down and 2-1/8 po (55 mm) at 45°
Cutting depth without guide rail: 2-15/16 po (75 mm) straight down
Arbor size: 1.101 po (30 mm)
Weight: 13.6 lbs (6.2 kg)