DRILLPUMP750 WATER PUMP - 1314

Brand:
MILESCRAFT

Features:
The DrillPump750 is designed to work with most electrical drills with a maximum speed of 2,800 RPM. This water transfer pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. The hose connection is 3/4" and uses any standard garden hose. The unit pumps up to 750 gallons per hour and is self-priming up to 12 feet. The 3/8" shank on this unit fits all common chucks for most drills.

DrillPump750 Features:
• Unit pumps up to 750 gallons per hour
• Self-priming up to 12 feet
• 3/8" shank on this unit fits all common chucks
• 3/4" hose connection, for use with a standard garden hose
Tips & Tricks:
• Never run the DrillPump in reverse
• DrillPump will not turn by hand, this must be chucked to the drill.
• DrillPump must be mounted for proper usage, do not hold in hand.
• The hoses should be in good condition, include a gasket, and be completely tightened for priming
• After every use apply a small amount of silicone grease. To apply, remove the black housing screws and cover, and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. Any spray lubricants, such as WD-40, are not recommended, as they do not provide sufficient lubrication for this product and can cause damage to the internals of the pump.
• Do not get the drill wet, or use the drill pump with flammable liquids.

Specifications:
Delivery Rate Max: 750 Gallons / 3,000 liters per hour
Hose Connection: 1/2" (13 mm) / 3/4" (19 mm)
Threaded Connection: 3/4" (19 mm)
Hose Diameter 1/2" (13 mm): Pump lift 24 m
Hose diameter 3/4" (19 mm): Pump lift 18 m
Suction Height: 12 ft. (4 m)
Dry Running Max.: 30 seconds
Drill Output Min.: 600 W
Rotation Speed Max.: 2,800 RPM
Shank Diameter: 3/8" (9.5mm)
Housing Material: Glass Filled Nylon
Weight: 0.5 lbs