17" FLOOR DRILL PRESS

Brand:
KING INDUSTRIAL

Features:
The KING INDUSTRIAL KC-118FC 17 in. floor drill press is designed for workshop drilling tasks. Its 1 HP motor, 16 speeds and tilting table allow operation to be adapted to the drill bit and workpiece, while its 5/8 in. chuck holds drilling accessories.

• Sixteen spindle speeds, from 240 to 3,400 RPM, selected by repositioning the belts on the pulleys.
• Cast-iron pulleys help reduce vibration, with a ball-bearing-supported spindle.
• Crank-operated table height adjustment, swivelling table and up to 45° tilt for angled drilling.
• Depth adjustment for repeated drilling to a set depth.
• Feed handles with non-slip rubber grips.
• Electromechanical switch requires restarting after a power failure.
• Light socket integrated into the head with a separate switch; bulb not included.
• KM-118 chuck safety guard available separately.

Specifications:
Model: KC-118FC
UPC: 772995002559
Type: floor drill press
Motor power: 1 HP
Advertised drilling capacity: 3/4 in.
Chuck capacity: 5/8 in.
Swing: 17 in.
Spindle travel: 3-1/4 in.
Maximum chuck-to-table distance: 23-3/4 in.
Maximum chuck-to-base distance: 44 in.
Table diameter: 13-3/4 in.
Table tilt: up to 45°
Spindle taper: No. 2 Morse
Quill diameter: 65 mm
Number of speeds: 16
Speed range: 240–3,400 RPM
Voltage: 110/220 V
Factory wiring: 110 V
Amperage at 110 V: 12.5 A
Amperage at 220 V: 6.25 A
Power supply: single-phase, 60 Hz
220 V conversion: wiring changes and replacement of the plug and switch required
Assembled dimensions (L × W × H): 13-3/4 × 25 × 64 in.
Assembled weight: 185 lb

Includes:
(1) KING INDUSTRIAL KC-118FC floor drill press with table, base and light socket
(1) 5/8 in. keyed chuck
(1) Chuck key
(1) Chuck arbor