20" PLANER, 5HP , 4 KNIFES

Brand:
KING INDUSTRIAL

Features:
The KING INDUSTRIAL KC-520C 20 in. industrial planer is designed to bring wood workpieces to the desired thickness and prepare their surfaces in the workshop. Its 5 HP motor drives a four-knife cutterhead, while two feed speeds allow feeding to be adapted to hardwoods and softwoods.

• Four-knife cutterhead operating at 5,000 RPM.
• Two lever-selected feed speeds: 16 and 20 ft./min.
• Cast-iron extension tables support workpieces at the infeed and outfeed.
• Height-adjustable table supported by four precision-ground columns for stability.
• Knives rest on adjustable jack screws and are secured by locking bars and screws.
• Anti-kickback fingers ahead of the infeed roller help limit workpiece kickback.
• Magnetic safety switch.
• Mobile base system integrated into the cabinet for easier repositioning.
• 5 in. dust outlet for connection to a dust collector.
• Electrical plug not included; installation required according to the manufacturer’s instructions.

Specifications:
Model: KC-520C
UPC: 772995002580
Type: stationary industrial planer
Motor power: 5 HP
Maximum planing width: 20 in.
Maximum workpiece thickness: 8 in.
Maximum depth of cut according to the current specification: 3/32 in.
Total work surface with extensions: 56-1/2 × 20 in.
Number of knives: 4
Cutterhead diameter: 3.15 in.
Cutterhead speed: 5,000 RPM
Feed speeds: 16 and 20 ft./min
Cuts per inch: 104 at 16 ft./min; 83 at 20 ft./min
Dust outlet diameter: 5 in.
Motor amperage: 19 A
Voltage: 220 V
Power supply: single-phase, 60 Hz
Required circuit according to the manual: 30 A
Assembled dimensions (L × W × H): 40 × 56-1/2 × 42 in.
Assembled weight: 830 lb

Includes:
(1) KING INDUSTRIAL KC-520C industrial planer with cabinet and integrated mobile base
(4) Planer knives installed in the cutterhead
(2) Cast-iron extension tables
(1) Knife-setting gauge
(1) 5 in. dust outlet