GUIDE DE COUPE DE REBORDS POUR SCIE CIRCULAIRE

Brand:
MILESCRAFT

Features:
The Milescraft® RipSawGuide™ makes breaking down large sheets easy. Use it in the workshop or on the jobsite to turn large sheets into smaller, more manageable sections.
The RipSawGuide™ is universally compatible with 5-1/2 to 7-1/4 in saws, including both sidewinder and worm-drive styles. This provides more mounting options. The metal saw plate features built-in rubber to help prevent slipping and secures the circular saw with four points of contact.
The all-metal construction of the guide rail and saw plate also reduces flex during operation for straighter, more accurate cuts. The adjustable edge guide reaches up to 24 in from the edge of the workpiece, allowing you to cross-cut full sheets in half.
To calibrate the RipSawGuide™, align the edge guide with your saw blade and set the micro-adjust indicator to zero. After making a test cut, measure the result and reset the arrow to the cut you achieved. The laser-etched scales feature 1/16 in increments to help you fine-tune the cut.

• Heavy-duty all-metal construction reduces flexing and produces consistent, accurate cuts
• Universal compatibility with corded and cordless sidewinder and worm-drive saws with 5-1/2 to 7-1/4 in blades (13.97 to 18.41 cm)
• Easy-to-read laser-etched precision scales
• Four clamping points for a more secure hold
• Rubber-coated metal base provides a secure grip on the saw
• Micro-adjust fence control allows you to fine-tune cutting accuracy

Specifications:
Base Material: Aluminum saw plate with rubber
Guide Bar Material: Extruded aluminum
Edge Guide Material: Reinforced plastic
Compatible Saws: Sidewinder and worm-drive saws with 5-1/2 to 7-1/4 in blades (13.97 to 18.41 cm)
Edge Range: 24 in
Clamping Points: 4
Scale: Laser-etched, 1/16 in increments
Calibration: Micro-adjust fence control allows you to fine-tune cutting accuracy