3-1/2" 18V BRUSHLESS STRIP FRAMING NAILE - NR1890DCSM
3-1/2" 18V BRUSHLESS STRIP FRAMING NAILE - NR1890DCSM
Quantity available : 2
Warehouse La Prairie (0)
Warehouse Sherbrooke (1)
Warehouse St-Hubert (1)
Availability to come : 0
Brand:
METABO HPT
Features:
Brushless motor for longer run time per charge, less maintenance and increased durability.
Powered by a Compact 3.0 Ah Lithium battery that is 3/4 in. shorter and 0.6 lbs lighter than a conventional 3.0 Ah battery for complete portability.
Drives up to 400 nails per charge using the compact 3.0 Ah battery.
Tool-less depth of drive adjustment for a professional finish with varying materials.
Power switch located on control panel must be depressed for 1 second to activate the nailer and automatically switches off after 30 minutes of inactivity for added safety.
Selective actuation on the control panel transitions between sequential mode and bump fire mode, when rapid nailing is preferred.
Ergonomically formed soft grip handle provides comfort and ensures a secure hold.
Dry fire lock out system prevents nailer from driving when fasteners are low for added safety.
Side lock trigger switch located on handle, locks the trigger to prevent accidental firing when nailer is not in use.
Pivoting rafter hook for easy storage when nailer is not needed.
30° magazine holds approximately 47 paper strip collated fasteners from 2 in. up to 3-1/2 in. in length.
High & stable driving power allows the nailer to drive 3-1/2 in. nails into even the toughest of engineered lumber with ease.
Hardened claw tip resists wear on the nose and minimizes slippage when driving at an angle or toe-nailing.
Freedom from cumbersome air hose and compressor saves time in setup, during applications and in jobsite clean up.
Specifications:
Fasteners: Paper Strip Framing Nails
Fastener Length: 2 in. - 3-1/2 in.
Fastener Diameter: 0.113 to 0.131 in.
Fastener Head: Clipped & Offset Round
Magazine Capacity: 47
Magazine Angle: 30+/- degrees
Battery Type: 18V Lithium
Battery Amp Hour: Compact 3.0 Ah
Depth of Drive: Tool-less
Motor Type: Brushless
Driving Speed: Up to 2 Nails/Sec
Nails per Charge: Up to 400
Firing Modes: Sequential/Bump
Weight w /battery: 10.6 lbs
Included:
(1) Compact 3.0 Ah Lithium Battery BSL1830C (339782)
(1) Fast Charger (UC18YFSL)
(1) Contractor Bag (372294)
(1) Safety Glasses (875769)
| Manufacturer | HITACHI |
|---|---|
| incomming qty | 0.00 |
| NAIL TYPE | Bande de papier |
| TOOL TYPE | Cloueuse |
| BATTERY TYPE | 18 V |
| AMPERAGE HOUR | 3.0 Ah |
| NUMBER OF BATTERIES INCLUDED | 1 |
| KIT TYPE | Outil avec batterie |