9.99$ delivery

Multimètres, ampèremètre...


View full size



4 items in stock



Add to wishlist




The Fluke T5 Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100 A-without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to carry the T5 in your tool bag. Detachable SlimReach test probes are customized for electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt.
Automatically measures volts AC and volts DC with precise digital resolution.
Displays resistance to 1000 -.
Easy and accurate OpenJaw current measurement.
Continuity beeper.
Compact design with neat probe storage.
Rugged enough to withstand a 3-meter drop.
Detachable SlimReach probe tips are customized for national electrical standards.
Test leads accept Fluke accessory test clips.
Overvoltage category: 600 V ac/dc, CAT III.
Stay connected much longer than solenoid type tester.
Auto off mode to conserve battery life.
Optional holster attaches to a belt and neatly stows test leads.


Jaw opening: 12.9 mm (0.5 in)
Max wire size: 1/0 THHN Cable
Current range AC rms: 0 to 100.0 A
Accuracy AC current (50/60 Hz): 3 % ± 3 counts
AC Response: Averaging
Voltage range AC: 0 to 600 V
Accuracy ac voltage: 1.5 % ± 2 counts
Voltage range DC: 0 to 600 V
Accuracy dc voltage: 1 % ± 1 count
Resistance range: 0 to 1000 -
Continuity beeper threshold: On at <25 -, off at >400 -
Volts indicator LED threshold: Guaranteed on by 30 V AC
Operating temperature: -10 ºC to 50 ºC
Storage temperature: -30 ºC to 60 ºC
Humidity (without condensation): 0 % to 95 % (5 ºC to 30 ºC) 0 % to 75 % (30 ºC to 40 ºC), 0 % to 45 % (40 ºC to 50 ºC)
Dust/water resistance: Yes
Operating altitude: 2000 meters max
Temperature coefficient: 0.1 x (specified accuracy)/ºC (<18 ºC or >28 ºC)
Overvoltage category: CAT III 600 V ac/dc (EN61010-1)
Agency approvals: CSA, TUV and CE
Maximum voltage: Between any terminal and earth ground
Size: 30.5 mm x 51 mm x 203 mm
Weight: 300 g
Battery life: 200 hour zinc chloride, 400 hour alkaline
Battery type: 2 x AA
Low battery indicator: Yes
Current sensor opening: 12.9 mm
Calibration cycle: One-year
Test leads Type: Heavy duty, flexible leads rated for 1000 V use Field replaceable leads terminate in male shrouded banana plugs
Test leads Probes: One red, one black Detachable Slim-Reach probe tips
Test leads Styles: TP1 Slim Reach Test Probes

No customer comments for the moment.

Write your review



Write your review

27 other products in the same category: