9.99$ delivery

Brakes for Aluminum

Catalog

Enabled filters:
Condition v

Brakes for Aluminum

Brakes for Aluminum

Subcategories

  • Brakes Accessories (8)
  • Measuring Jig (3)
  • Mark II Commercial Van Mark (2)

    Features:
    Commercial Model
    Van Mark Products, known throughout the industry for the superior quality of its products and customer service, continues the proud tradition with the Mark II TrimMaster arrives with leading technologies such as the POWERslot. Easier bending, making smaller "J" channels and hollow core hinge extrusions for added strength. We've also left you the ability to make fine-tune adjustments to this brake, though you may never have to. Ultra High Molecular Weight (UHMW), wedges are independently adjustable and replaceable should the occasion ever arise. After all, we believe a Van Mark brake is the closest thing to a "non-adjustment" brake you'll find out there.

    The Mark II TrimMaster® Commercial brake has additional "C" castings to handle medium grade metals with ease. Like the Contractor, the Commercial model provides all the bending power needed without sacrificing one of the most important features in a job site brake, portability!
    Common Bending Capacities:
    Aluminum Coil recommended: 0.032"
    Aluminum Coil maximum: 0.050"
    Gutter Coil recommended: 0.027"
    Gutter Coil maximum: 0.032"
    Galvanize Steel Grade D recommended: 26 ga.
    Galvanize Steel Grade D maximum: 22 ga.
    Galvanize Steel Grade E recommended: 29 ga.
    Galvanize Steel Grade E maximum: 26 ga.
    Copper recommended: 24 oz.
    Copper maximum: 32 oz.
    Specification:
    POWERslot -New technology adds more bending power without sacrificing capacities.
    Quick Hemming - Easily makes 180 degree over bends.
    Built-In-Tape Rule- Standard/Metric scale takes the guess work out of your bending routine.
    Large Working Pocket- For complex custom bends without brake interference.
    Vinyl Strips-Does not mar metal finishes while providing cushioned contact during bends.
    Still Adjustable - You may never have to adjust your brake, but if you want to, that option is up to you.
    Full Loop Handle - Ergonomic and Easy to grab, ensures even bending. Detaches quickly for transport.

  • Mark II Contractor Van Mark (3)

    Features:
    Contractor Model.
    Van Mark Products, known throughout the industry for the superior quality of its products and customer service, continues the proud tradition with the Mark II TrimMaster arrives with leading technologies such as the POWERslot. Easier bending, making smaller "J" channels and hollow core hinge extrusions for added strength. We've also left you the ability to make fine-tune adjustments to this brake, though you may never have to. Ultra High Molecular Weight (UHMW), wedges are independently adjustable and replaceable should the occasion ever arise. After all, we believe a Van Mark brake is the closest thing to a "non-adjustment" brake you'll find out there.
    Common Bending Capacities:
    Aluminum Coil recommended: 0.024"
    Aluminum Coil maximum: 0.040"
    Gutter Coil recommended: 0.024"
    Gutter Coil maximum: 0.024"
    Galvanize Steel Grade D recommended: 28 ga.
    Galvanize Steel Grade D maximum: 24 ga.
    Copper recommended: 16 oz.
    Copper maximum: 20 oz.
    Specification:
    POWERslot -New technology adds more bending power without sacrificing capacities.
    Quick Hemming - Easily makes 180 degree over bends.
    Built-In-Tape Rule- Standard/Metric scale takes the guess work out of your bending routine.
    Large Working Pocket- For complex custom bends without brake interference.
    Vinyl Strips-Does not mar metal finishes while providing cushioned contact during bends.
    Still Adjustable - You may never have to adjust your brake, but if you want to, that option is up to you.
    Full Loop Handle - Ergonomic and Easy to grab, ensures even bending. Detaches quickly for transport.

  • Mark IV Trimmaster Van Mark (2)

    Features:
    The Mark IV Industrial TrimMaster, featuring new POWERslot technology, provides single user setup and operation in the shop and on the job site. Non-marring vinyl strips protect clad finishes leaving clean crisp bend lines and hems. The unique cam-locking system clamps to the thickness of the material and not to a factory preset. Should you ever need to fine-tune your brake, each casting comes with independently adjustable UHMW plastic wedges. While some brake manufacturers have taken away your ability to make these adjustments, its nice to know TrimMaster gives you the choice, even if you never have to use it.
    Common Bending Capacities:
    Aluminum Coil recommended: 0.040"
    Aluminum Coil maximum: 0.063"
    Gutter Coil recommended: 0.032"
    Gutter Coil maximum: 0.032"
    Galvanize Steel Grade D recommended: 24 ga.
    Galvanize Steel Grade D maximum: 20 ga.
    Galvanize Steel Grade E recommended: 24 ga.
    Galvanize Steel Grade E maximum: 24 ga.
    Copper recommended: 32 oz.
    Copper maximum: 36 oz.
    Specification:
    Heavy-duty extruded aluminum shop stand included with every Mark IV. The Xtreme Shop Stand will not rock, rattle, roll or rust. Unit is fully detachable and collapsible for easy fast setup and transport.
    Hollow-core fixed hinge, bending hinge and base rail design makes this one tough brake. New FTA system (Fine-Tune Adjustment), means you still have control over adjusting your machine, though you may never need to.
    Mark IV Industrial TrimMaster has the strongest bending capacities you can get in a portable brake.
    Unique Cam-Locking system locks to the thickness of the material.
    Full loop locking and bending handles are ergonomic and provide for single operator use.
    Heavy-duty hinge provides years of dependable service without material curling at the ends or sags in the center.
    Mark IV Industrial now works with TrimCutter for quick clean material cutting right on the brake. TrimCutter does not ride off the brake during cut.

  • Metal Master 20 Van Mark (6)

    Features:
    The Industrial Master 20 incorporating the best locking system with the deepest throat in the portable brake industry.
    Strongest computer engineered casting for unmatched strength.
    Deepest throat available for working with wider materials.
    New hollow-core Power Lock bar for better clamping force.
    Increased bending radius. Make 180º hem bends easier than ever.
    Adjustable clamping jaws with the largest opening in its class.
    Ergonomic heavy-duty bending handles for improved leverage.
    Common Bending Capacities:
    Aluminum Coil recommended: 0.050"
    Galvanize Steel recommended: 20 ga.
    Painted Steel Grade D recommended: 24 ga.
    Copper recommended: 32 oz.
    Zinc Alloy recommended: 0.050"
    Stainless Steel recommended: 24 ga.
    Specification:
    Reinforced Lock Master castings are 25% stronger.
    Deepest working pocket available at 20 3/8".
    Low profile extended platform is 9" longer.
    Center-Weighted wheels "spin on a dime".
    Large Heavy-Duty Ball Bearing Wheels.
    Ergonomic heavy-duty bending handles

  • Spare Parts (4)
  • Aluminum Cut Table... (1)
There are 29 products.
top